Rave SLR - Road MY2024
Road

Rave SLR - Road MY2024

Expect the unexpected

Starting from 9.000,00 €
Filante Hybrid

V1 Black, Grey / Road Setup - Matt

Expect the unexpected

Racing attitude and balanced competition geometries: both less extreme than Filante SLR and Wilier 0 SLR, the bikes used by the Astana Team professionals. We have redrawn the boundaries of the all-road segment that centres on versatility. The data gathered in the wind tunnel have shown a 5% reduction in aerodynamic resistance compared to our Wilier 0 SLR super light frame. 

We weren't searching for the perfect bike but for the perfect balance between performance and comfort.
Wilier

Road Setup

The Shimano Dura-Ace Di2, Shimano Ultegra Di2 and SRAM Force eTap AXS transmission groups are paired with our carbon fibre 0-Bar integrated handlebar available in six stem/handlebar combinations. The three setups feature fast tires with 32 mm rim section used in the most important road competitions.
Responsive

Responsive

We have channelled all the experience gained in the use of technopolymers, mixing carbon with special viscoelastic fibres such as Liquid Crystal Polymers. Tried and tested construction technologies used for our racing models, which have made it possible to achieve a riding quality that all professional racers demand.
Lightweight

Lightweight

The size M frame tips the scale below 1000 g. The lamination combines the same carbon fibre fabrics used in making of Filante SLR and Wilier 0 SLR.
Wilier

Balanced Racing Geometries

To create a frame with balanced racing geometries, we started with top range road racing references and mixed them with frame specifications for endurance and gravel bikes: all without distorting the performance target that we set for ourselves at the start of the design phase. A slightly higher stack and a somewhat shorter reach compared to a pure competition bike, combined with the available carbon monocoque handlebars, become the perfect synthesis between high performance and comfort.
Easy-Fit Spacers

Easy-Fit Spacers

The spacers between the frame head tube and the handlebar are made of a high-stiffness composite material, with a special cavity for routing the cables. They consist of two parts for quick assembly and disassembly, without interfering with the cables set between the handlebar and the frame.
Handlebar and Integrated Cables

Handlebar and Integrated Cables

In addition to being lightweight, the 0-Bar monocoque handlebar houses the brake and controls cables, routing them inside the frame. The stem/handlebar combination features an essential design: sinuous and rounded lines that guarantee the best possible ergonomic grip. The Rave SLR encapsulates the elegance typical of Wilier high-end products.

Geometries

XSSMLXLXXL
C/C (cm) 43.246.248.250.252.254.2
L (cm) 5152.754.556.157.959.7
H (cm) 454850525456
A (°) 7574.57473.57372.5
L1 (cm) 42.142.242.342.342.542.7
H1 (cm) 9.811.813.415.417.218.9
A1 (°) 7070717171.572
Reach (mm) 370377384391398405
Stack (mm) 513532551570589608
Wheelbase (mm) 99710121017103110411051
Geometries| Wilier

Improve your riding position with accu-fit

Correct positioning in the saddle is one of the most essential issues for cyclists, especially for competitors and long-distance cyclists. While with steel bikes, it was relatively easy to measure the length of the tubes, as the years passed, and with the introduction of sloping top tubes, defining measurements has become increasingly complex. So, in addition to the classic values of height, length and angles, we now consider reach & stack data and horizontal and vertical distance values between the centre of the bottom bracket and the centre of the upper part of the head tube.
 
But modern bicycles have made measurement even more complex, since they are complete and complex systems based on the combination of the frame, handlebar spacers and monocoque handlebars. When buying a bike, it is essential to know the size of every bike element based on your body size and shape. As manufacturers of frames and monocoque handlebars, we have added a new value to the measurement of the frame which combines the length of the head tube and the dimensions of the monocoque handlebar.
 
This coordinate, called ACCU-FIT, determines the distance between the bottom bracket's center and the handlebar's center. It is clear that for every model there are as many coordinates as frame sizes multiplied by the number of handlebar sizes and the configuration of spacers.
Geometries| Wilier

Setup & Prices

Code Drivetrain Model Wheelset Price
E217IDL SHIMANO DURA ACE Di2 R9270 WILIER SLR42KC 11.000,00 €
Frame: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
Fork: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
H-Bar: ZERO BAR INTEGRATED CARBON
H-Bar weight: 360 g +/- 5%
Headset: WILIER CUSTOM BEARINGS SUPERSLIM
Shifters: SHIMANO DURA ACE ST-R9270 Di2
Brakes: SHIMANO DURA ACE BR-R9270
Rotors: SHIMANO DURA ACE RT-MT900 CENTER LOCK 160 mm / 140 mm
Front derailleur: SHIMANO DURA ACE FD-R9250 Di2
Rear derailleur: SHIMANO DURA ACE RD-R9250 Di2
Crankset: SHIMANO DURA ACE FC-R9200
Bottom bracket: SHIMANO DURA ACE PRESS FIT SM-BB92
Cassette: SHIMANO DURA ACE CS-R9200 12S
Chain: SHIMANO DURA ACE CN-M9100 12S
Tyres: VITTORIA CORSA SPEED 700X32
Saddle: PROLOGO DIMENSION AGX
Seatpost: FILANTE SLR CUSTOM MADE -15 mm/0 mm
Axle: THRU AXLE 12X122 FRONT - 12X168 REAR
Frame weight: 950 g +/- 5%
Fork weight: 415 g +/- 5%
E217LDL SHIMANO ULTEGRA Di2 R8170 WILIER SLR42KC 9.000,00 €
Frame: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
Fork: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
H-Bar: ZERO BAR INTEGRATED CARBON
H-Bar weight: 360 g +/- 5%
Headset: WILIER CUSTOM BEARINGS SUPERSLIM
Shifters: SHIMANO ULTEGRA ST-R8170 Di2
Brakes: SHIMANO ULTEGRA BR-R8170
Rotors: SHIMANO ULTEGRA RT-MT800 CENTER LOCK 160 mm / 140 mm
Front derailleur: SHIMANO ULTEGRA FD-R8150 Di2
Rear derailleur: SHIMANO ULTEGRA RD-R8150 Di2
Crankset: SHIMANO ULTEGRA FC-R8100
Bottom bracket: SHIMANO ULTEGRA PRESS FIT SM-BB72
Cassette: SHIMANO ULTEGRA CS-R8100 12S
Chain: SHIMANO ULTEGRA CN-M8100 12
Tyres: VITTORIA CORSA SPEED 700X32
Saddle: PROLOGO DIMENSION AGX
Seatpost: FILANTE SLR CUSTOM MADE -15 mm/0 mm
Axle: THRU AXLE 12X122 FRONT - 12X168 REAR
Frame weight: 950 g +/- 5%
Fork weight: 415 g +/- 5%
E417F2L SRAM FORCE D2 AXS 2x12 WILIER SLR42KC 9.000,00 €
Frame: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
Fork: RAVE SLR - CARBON MONOCOQUE HUS MOD + LIQUID CRYSTAL POLYMER
H-Bar: ZERO BAR INTEGRATED CARBON
H-Bar weight: 360 g +/- 5%
Headset: WILIER CUSTOM BEARINGS SUPERSLIM
Shifters: SRAM FORCE eTAP AXS HRD SHIFT
Brakes: SRAM BRAKE SYSTEM ED-FRC-D2 2x12
Rotors: SRAM PACELINE XR CENTERLOCK 160 mm / 160 mm
Front derailleur: SRAM FORCE eTAP AXS FD-FRC-E-D2
Rear derailleur: SRAM FORCE eTAP AXS RD-FRC-E-D2
Crankset: SRAM FORCE FC-FRC-D2 48-35T
Bottom bracket: SRAM DUB PRESSFIT BB-DUB-PF-A1
Cassette: SRAM FORCE CS-XG-1270-D2 10-33T
Chain: SRAM FORCE CN-FRC-D2
Tyres: VITTORIA CORSA SPEED 700X32
Saddle: PROLOGO DIMENSION AGX
Seatpost: FILANTE SLR CUSTOM MADE -15 mm/0 mm
Axle: THRU AXLE 12X122 FRONT - 12X168 REAR
Frame weight: 950 g +/- 5%
Fork weight: 415 g +/- 5%

The prices, specifications and photos shown in this catalog are not subject to any contractual obligation and may change during the season.

FAQ

  • How much does the frame weigh?
    The frame weighs 950g for a painted size M.
  • What transmissions can be installed on the Rave SLR?
    Rave SLR is intended for competition gravel. This is why it can mount groups designed for use on both gravel and road as well. The bike can be fitted with electronic /mechanical disc brake systems.
  • What type of stem / handlebar can I install on Rave SLR?
    The standard bike features a 0-Bar for the road configuration and a J-Bar for the gravel version. The use of Wilier Triestina carbon spacers also makes it possible to switch to a Filante Bar and a Stemma SL.

  • Do the integrated cables pass through the handlebar?
    The cables are integrated inside the frame, running through the superthin bearing and inside the integrated handlebar.
  • Is the superthin™ bearing available as a spare part?
    Yes. The upper superthin bearing is not normally available on the market but is a design owned by Wilier Triestina and will only be available at the Wilier Triestina authorized dealers.
  • Does the Rave SLR require a dedicated seatpost?
    Yes, Rave SLR fits an exclusive design Wilier Triestina seatpost.
  • What are the sizes of the thru axle system?
    The frame design is Speed Release. The bike comes standard with a traditional full pull-out axle. Mavic Speed Release thru axles can be purchased through the Wilier Triestina authorized dealers.
  • How can I clean my Rave SLR?
    We recommend cleaning with water and a soft cloth or sponge. Please note that some cleaning agents can damage the finish on the Rave SLR. We do not recommend the use of pressurized water or air when cleaning the Rave SLR frame.
  • What frame protectors are standard?
    The seat stay is protected by a dedicated rubber chainstay protector with special reinforced thickness.
  • What is the maximum crankset gear size that can be fitted on a Rave SLR?
    The maximum size of the double crankset gear is 52T for Shimano groupsets. For all other groupsets, the maximum size is 50T.

Customer care

Contact Us to get information about your order and our products.

Shipping and returns

Express delivery within 3-5 working days. Terms & Conditions

Free Shipping

Find out the minimum order amounts in the terms and conditions of purchase. Terms & Conditions

Secure Payment

On wilier.com your online payments are always protected.